FUJI INVERTER FRENIC ACE E2S SERIES HHD SPEC FRN0044E2S-4GB

FRN0044E2S-4GB [ INVERTER FUJI ]

มีสินค้าพร้อมส่งปรึกษาฟรี!!!

ตัวแทนจำหน่าย FRN0044E2S-4GB Inverter Fuji 15kW 380V 3Phase รุ่น Frenic ACE

คู่มือการใช้งาน HHD SPEC Manual Dimension ฟรีปรึกษาปัญหาการใช้งาน

ขอราคาด่วน แอดID-Line:0982549060 โทร:098 254 9060

FUJI INVERTER FRENIC ACE E2S SERIES

[ INVERTER FRENIC ACE E2S Catalog Download ]

สอบถามราคาสินค้า ทาง LINE เพื่อความสะดวกและรวดเร็ว

ADD ID-LINE : 0982549060

ส่งชื่อผู้ติดต่อ เบอร์ติดต่อ ชื่อบริษัท

ส่งโมเดลหรือส่งรูป สอบถามสินค้า ขอใบเสนอราคา

ฝ่ายขาย TEL : 098-254-9060 ID-LINE : 0982549060 Email : SystemEnergy01@gmail.com

Specification INVERTER

- 7 Input digital External Signals : [ FWD , REV , X1 , X2 , X3 , X4 , X5 ]
- 2 Analog Input : [ +0 to +10 V DC , +4 to +20mA DC ][ +0 to +10VDC , Potentiometer 13,12,11 ]
- 2 Transistor Output [ Y1 , Y2 ]
- 1 Relay Output
- 1 Analog Output: [ +0 to +10 V DC ]
-- The Output Frequency Can be Set to a Maximum of 400 Hz.
-- Multistep Frequency : Selectable from 8 Step
-- HIgh Starting Torque , at 150% .
-- A removable keypad is standard equpmint.
-- V/f Control ( Simplified torque - vector control )
-- PID Control Function.
-- Cooling Fan ON/OFF Control Function.
---ฺ( Option Card ) RS485 Communications Port.

CARRIER FREQUENCY
[ Three phase 400V class ]
- Type 0002 to 0059:
- 0.75 to 16kHz variable (HHD/HND/HD spec.)
- 0.75 to 10kHz variable (ND spec.)
- Type 0072 to 0168:
- 0.75 to 16kHz variable (HHD spec.)
- 0.75 to 10kHz variable (HND/HD spec.)
- 0.75 to 6kHz variable (ND spec.)
- Type 0203 or above type of capacity:
- 0.75 to 10kHz variable (HHD spec.)
- 0.75 to 6kHz variable (HND/HD/ND spec.)
[ Three phase 200V class ]
- Type 0030,0040,0056,0069
- 0.75 to 16kHz variable (HHD/HND/ spec.)
- Type 0012 and 0020:
- 0.75 to 16kHz variable (HHD spec.)
- 0.75 to 10kHz variable (ND spec.)
- Type 0115:
- 0.75 to 16kHz variable (HHD spec.)
- 0.75 to 10kHz variable (HND spec.)
[ Single phase 200V class ]
- Type 0001 to 0011
- 0.75 to 16kHz variable (HHD spec.)

CONTROL METHOD
- V/f control
- Speed sensor less vector Control (Dynamic torque vector control)
- V/f Control with slip compensation active
- V/f Control with speed sensor (The PG option card is required.)
- V/f Control with speed sensor (+Auto Torque Boost) (The PG option card is required.)
- Vector Control with speed sensor (The PG option card is required.)
- Vector Control without magnetic pole position sensor

FREQUENCY SETTING
Keypad Operator
[ Settable with UP and Down keys ]
External Volume
[ Available to be set with external frequency command potentiometer. (1 to 5 kΩ 1/2 W) ]
ANALOG INPUT
[ 0 to ±10 V DC (±5 V DC) / 0 to ±100% (terminal [12]) ]
[ 0 to +10 V DC (+5 V DC) / 0 to +100% (terminal [12]) ]
[ +4 to +20 mA DC / 0 to 100% (terminal [C1]) ]
[ +4 to +20 mA DC / -100 to 0 to 100% (terminal [C1]) ]
[ 0 to +20 mA DC / 0 to 100% (terminal [C1]) ]
[ 0 to +20 mA DC / -100 to 0 to 100% (terminal [C1]) ]
[ 0 to +10 V DC (+5 V DC) / 0 to +100% (terminal [V2]) ]
[ 0 to +10 V DC (+5 V DC) / -100 to 0 to +100% (terminal [V2]) ]
Link Operation
[ Can be specified via built-in RS-485 built-in ]
Pulse train input
Pulse input Terminal [X5] Rotational direction : Another input terminal except [X5]
Complementary output : Max. 100 kHz Open collector output : Max. 30 kHz

FUNCTIONS [ X1 ][ X2 ][ X3 ][ X4 ][ X5 ][ FWD ][ REV ]
[ Select multi-frequency (0 to 1 steps) ]
[ Select multi-frequency (0 to 3 steps) ]
[ Select multi-frequency (0 to 7 steps) ]
[ Select multi-frequency (0 to 15 steps)]
[ Select ACC/DEC time (2 steps) ]
[ Select ACC/DEC time (4 steps) ]
[ Enable 3-wire operation ]
[ Coast to a stop ]
[ Reset alarm ]
[ Enable external alarm trip ]
[ Ready for jogging ]
[ Select frequency command 2/1 ]
[ Select motor 2 (M2) ]
[ Enable DC braking ]
[ Select torque limiter level 2/1 ]
[ Switch to commercial power (50 Hz) ]
[ Switch to commercial power (60 Hz) ]
[ UP (Increase output frequency) ]
[ DOWN (Decrease output frequency) ]
[ Enable data change with keypad ]
[ Cancel PID control ]
[ Switch normal/inverse operation ]
[ Interlock ]
[ Cancel torque control ]
[ Enable communications link via RS-485 or fieldbus (option) ]
[ Universal DI ]
[ Enable auto search for idling motor speed at starting ]
[ Force to stop ]
[ Pre-excitation (EXITE) ]
[ Reset PID integral and differential components ]
[ Hold PID integral component ]
[ Select local (keypad) operation ]
[ Activate the limit switch at start point ]
[ Start/reset ]
[ Switch to the serial pulse receiving mode]
[ Enter the return mode ]
[ Enable overload stop ]
[ Servo lock command ]
[ Pulse train input ]
[ Pulse train sign ]
[ Battery / UPS operation ]
[ Select torque bias 1 ]
[ Select torque bias 2 ]
[ Hold torque bias ]
[ Check brake control ]
[ Line speed control ]
[ Cancel line speed control ]
[ Hold the linel speed control frequency in the memory ]
[ Count the run time of commercial power-driven motor 1 ]
[ Count the run time of commercial power-driven motor 2 ]
[ Select droop control ]
[ Select parameter 1 ]
[ Select parameter 2 ]
[ Cancel customizable logic ]
[ Clear all customizable logic timers ]
[ Cancel automatic deceleration ]
[ Run forward command ]
[ Run reverse command ]
[ No function assigned ]
[ PID multistep command 1 ]
[ PID multistep command 2 ]

Displays Cause of trip :
[ OC1 ] : Overcurrent during acceleration

[ OC2 ] : Overcurrent during deceleration

[ OC3 ] : Overcurrent at constant speed

[ Lin ] : Input phase loss

[ LU ] : Under Voltage

[ OPL ] : Output phase loss
[ OU1 ] : Overvoltage during acceleration

[ OU2 ] : Overvoltage during deceleration

[ OU3 ] : Overvoltage during constant speed
[ OH1 ] : Overheating of the heat sink

[ OH2 ] : External Alarm

[ OH3 ] : Inverter Overheat
[ OH4 ] : Motor Protection PTC Thermistor

[ OL1 ] : Motor 1 Overload

[ OL2 ] : Motor 2 Overload
[ OLU ] : Inverter Overload

[ Er1 ] : Memory error

[ dbH ] : Overheating of the braking resistor
[ PG ] : PG disconnection

[ Er2 ] : Keypad communication error

[ Er3 ] : CPU error
[ Er6 ] : Operation error

[ Er7 ] : Tuning error

[ Er8 ] : RS485 error
[ Er4 ] : Option communication error

[ Er5 ] : Option error

[ ErP ] : RS485 communication error Option
[ ErF ] : Data save error due to undervoltage

[ ErH ] : Power LSI error

[ Err ] : Simulation error

INVERTER FUJI FRENIC ACE E2S

---------------------------------------------------------------------------

---------------------------------------------------------------------------
---------------------------------------------------------------------------

INVERTER FUJI FRENIC MEGA G1S

INVERTER FUJI FRENIC MINI C2S

---------------------------------------------------------------------------

---------------------------------------------------------------------------
---------------------------------------------------------------------------

INVERTER FUJI FRENIC MINI C1S

---------------------------------------------------------------------------

---------------------------------------------------------------------------
---------------------------------------------------------------------------

INVERTER FUJI FRENIC MULTI E1S

---------------------------------------------------------------------------

INVERTER FUJI FRENIC ECO F1S

---------------------------------------------------------------------------

---------------------------------------------------------------------------
---------------------------------------------------------------------------

INVERTER FUJI FRENIC HVAC AR1M

---------------------------------------------------------------------------
---------------------------------------------------------------------------

INVERTER FUJI FRENIC FVR-E11S

INVERTER FUJI FRENIC LM1S LIFT

INVERTER FUJI FRENIC 5000G11S

อินเวอร์เตอร์ฟูจิ รุ่นนี้เลิกผลิตแล้ว

---------------------------------------------------------------------------
---------------------------------------------------------------------------

INVERTER FUJI FRENIC 5000P11S SERIES

อินเวอร์เตอร์ฟูจิ รุ่นนี้เลิกผลิตแล้ว

---------------------------------------------------------------------------
---------------------------------------------------------------------------

Copyright (c) 2017	999/293 หมู่ที่ 2 ถนนสุขุมวิท ตำบลท้ายบ้าน อำเภอเมือง จังหวัดสมุทรปราการ 10280
บริษัท ซิสเต็ม เอ็นเนอร์ยี่ เวิร์ค จำกัด	เลขที่ประจำตัวผู้เสียภาษี 0115560023476 Tel ; 098-254-9060 ID-LINE ; 0982549060 Fax ; 02-103-6190
( สำนักงานใหญ่ )	www.systemenergyworks.com