INVERTER VFD015EL23A

       


INVERTER VFD015EL23A
INVERTER DELTA EL SERIES
VFD015EL23A INVERTER DELTA EL SERIES SYSTEM ENERGY WORKS
 
Voltage Class 230V
Model Number  VFD015EL23A
Max.Applicable Motor Output (kW) 1.5kW
Max.Applicable Motor Output (Hp) 2Hp
Rated Output Capacity (kVA) 2.9kVA
Rated Output Current (A) 7.5A
Maximum Output Voltage (V) 3 - Phase Proportional to Input Voltage
Output Frequency (Hz) 0.1 - 600 Hz
Carrier Frequency (kHz) 2-12kHz
Rated Input Current (A) 9A
Rated Input Voltage/Frequency 3 - Phase , 200-240V , 50/60Hz
Voltage Tolerance +/-10%(180-264V)
Frequency Tolerance +/-5%(47-63Hz)
Cooling Method Fan Cooling
Weight(kg) 1.7kg
   
Control System SPWM(Sinusoidal Pulse Width Modulation) Control(V/f Control)
Frequency Setting Resolution  0.01Hz
Output Frequency Resolution 0.01Hz
Torque Characteristics Including the auto-torque/auto-slip compensation ; starting torque can be 150% at 5.0Hz
Overload Endurance 150% of rated current for 1 minute
Skip Frequency Three zones,setting range 0.1-600Hz
Accel/Decel Time 0.1 to 600 seconds (2 independent settings for Accel/Decel time)
Stall Prevention Level Setting 20 to 250% of rated Current
DC Braking Operation frequency 0.1-600.0Hz,output0-100% rated current, start time 0-60seconds,stop time 0-60seconds
Regenerated Braking Torque Approx.20% (up to 125% possible with optional brake resistor or externally mounted brake unit,1-15hp (0.75-11kW) models have brake chopper built-in 
V/F Pattern Adjustable V/f pattern
Frequency Setting Keypad Setting by arrow
Frequency Setting External Signal Potentiometer-5k/0.5W, 0 to +10VDC, 4 to 20mA, RS-485 interface; Multi-function Input 3 to 6 (15step,jog,up/down)
Operation Setting Signal Keypad set by RUN and STOP
Operation Setting Signal External Signal 2wires/3wires ((MI1,MI2,MI3)),JOG operation, RS-485 serial interface (MODBUS), programmable logic controller
Muti-Function Input Signal  Multi-step selection 0 to 15, Jog, accel/decel inhibit, 2accel/decel switches; counter, external Base Block, ACI/AVI selections, driver reset, UP/DOWN key setting, NPN/PNP input selection 
Muti-Function Output Indication AC drive operating, frequency attained, counter attained, Zero speed, Base Block, fault indication, overheat alarm, emergency stop and status selections of input terminals
Analog Output Signal Output frequency/current
Alarm Output Contact Contact will be ON when drive malfunctions (1 Form C/change-over contact or 1 open collector output)
Operation Functions AVR, accel/decel S-Curve, over-voltage/over-current stall prevention, 5fault records, reverse inhibition, momentary power loss restart, DC braking, auto torque/slip compensation, adjustable carrier frequency, output frequency limits, parameter lock/reset, PID control, external counter, MODBUS communication, abnormal reset, abnormal restart, power-saving,fan control, sleep/wake frequency, 1st/2nd frequency source selection, 1st/2nd frequencysource combination, NPN/PNP selection, constant pressure function
Protection Functions Over voltage, over current, under voltage, external fault, overload, ground fault, overheating, electronic thermal, IGBT short circuit, PTC
Display Keypad 6-key, 7-segment LED with 4-digit, 4status LEDs, master frequency, output frequency, output current, custom units, parameter values for setup and lock, faults, RUN, STOP, RESET, FWD/REV
Built-in EMI Filter For 230V 1-phase and 460V 3-phase models
Enclosure Rating IP20
Pollution Degree 2
Installation Location Altitude 1,000m or lower, keep from corrosive gasses, liquid and dust
Ambient Temperature -10C to 50C (40C for side-by-side mounting)
Storage/Transportation Temperature -20C to 60C
Ambient Humidity Below 90% RH (non-condensing)
Vibration 9.80665m/s2 (1G) less than 20Hz, 5.88m/s2(0.6G) at 20 to 50Hz
Approval Approval CE UL US
Dimensions VFD015EL23A

 

  

INVERTER DELTA VFD-EL SERIES
 
  INVERTER VFD004EL21A [   0.4kW 1/2HP 220V 1Phase ]
INVERTER VFD007EL21A [ 0.75kW    1HP 220V 1Phase ]
INVERTER VFD015EL21A [   1.5kW    2HP 220V 1Phase ]
INVERTER VFD022EL21A [   2.2kW    3HP 220V 1Phase ]
---------------------------------------------------------------------
INVERTER VFD004EL23A [   0.4kW 1/2HP 220V 3Phase ]
INVERTER VFD007EL23A [ 0.75kW    1HP 220V 3Phase ]
INVERTER VFD015EL23A [   1.5kW    2HP 220V 3Phase ]
INVERTER VFD022EL23A [   2.2kW    3HP 220V 3Phase ]
INVERTER VFD037EL23A [   3.7kW    5HP 220V 3Phase ]
---------------------------------------------------------------------
INVERTER VFD004EL43A [   0.4kW 1/2HP 380V 3Phase ]
INVERTER VFD007EL43A [ 0.75kW    1HP 380V 3Phase ]
INVERTER VFD015EL43A [   1.5kW    2HP 380V 3Phase ]
INVERTER VFD022EL43A [   2.2kW    3HP 380V 3Phase ]
INVERTER VFD037EL43A [   3.7kW    5HP 380V 3Phase ]